FemtoDAS Series Specifications

The EME FemtoDAS is a very small and affordable 8-channel data recorder. With a size of 3" x 2" x .4" the DAS an be used in a variety of applications. An internal 3-axis accelerometer and 3-axis gyro are optional. The 3-axis gyro connects to internal digital inputs so the user will have 5 analog inputs along with the internal 3-axis accelerometer and 3-axis gyro. The FemtoDAS is available in an encapsulated housing that can withstand up to 10,000 G.

      Features:

      • 8 analog channels available
      • Airborn (tm) N Series Connectors
      • Synchronous triggering and simultaneous sampling between daisy chained units
      • Simultaneous Sampling of 1 Hz to 100 kHz
      • Individual 16-bit A/D converters for each channel
      • Gain range of 1 to 640
      • Analog Input of +/- 2.5 volts
      • ICP Module allows any Analog Input to accept ICP Sensors
      • Offsetting available for the full scale at the Input or at the Output
      • .1% calibrated accuracy
      • Internal shunt calibration
      • Simultaneous sampling of channels
      • Individual fold-back current limited excitation sources of 2.5v and 5.0v. Current limit can be customer set or delivered as 100ma standard.
      • 6 pole Digital filtering with variable cut-off frequencies
      • 3 pole Fixed Butterworth filter @ 25kHz (Other frequencies available)
      • Meets SAE J211 specifications
      • Sensor identification using DALLAS ID's (Optional)
      • Automatic calibration of analog channels
      • Multi-stage sampling offering the sample rate to change up to 3 times at a set time or on the fly with an event line
      • Start/Stop Data Recording using an event line
      • Segmented Data Collection Mode offers the ablility to collect multiple acquisitions under one arming.
      • Battery input measurement and current monitor recording during acquisition
      • 4 GB, 8GB, 16GB, or 32 GB of non-volatile memory
      • 1 digital output channel
      • 4 or 16 digital event input channels
      • PCM Irig-B Input as well as PCM 106-01 Telemetry Output (Optional)
      • 3.5 - 6.0 volt power input range
      • Internal LiPo Battery with automatic charger
      • Low power consumption .500 amps 8 channels at 5 volts in full analog mode
      • Serial communication using Ethernet 100baseT
      • Durability of Shock:

        +/-10,000g, 12 msec 1/2 sine wave pulse on all axis

      • Windows XP/Vista/7/8 32-bit or 64-bit (tm) Control/Processing Software
      • EMI/RFI Shielding
      • 1 year warranty
      • The latest in technology

     


© 2015 EME Corporation - All Rights Reserved