The Calibration of EME Systems are in compliance with ISO/IEC 17025:2005. The Test Uncertainty Ratio (TUR) of this calibration is 4:1. Uncertainties are estimated at a 95% confidence level (k=2). This calibration gives a reasonable confidence level that the system is within the specifications published by EME Corporation. We provide test data and pass/fail on the following criteria:

Visual Inspection

Data Collection All Channel

Static Gain

Static Non-linearity

Class 1000 Frequency Response Gain 1.5

Class 1000 Frequency Response Gain 300

Channel Step Phase Response

Channel Phase Delay

Static Excitation

Excitation Short 2.5 Volt

Excitation Short 5 Volt

Excitation Short 10 Volt

Input Offset

Output Offset

Shunt and Rcal Resistors

Trigger, Digital Output/Input Timing

Sample Clock Stability

A full report is included with a Pass/Fail criterior and a description of the repairs and calibration corrections are included. We provide before and after data. This test ensures 100% functionality and compliance with EME specifications.

Contact Information:

Calibration Request:
Phone: (410) 544-8563
FAX: (410) 647-6791


© 2015 EME Corporation - All Rights Reserved